| 170 | 0 | 122 |
| 下载次数 | 被引频次 | 阅读次数 |
原子钟作为一种量子时间计量仪器，温度变化对其长期性能有较大影响。微波谐振腔是被动型氢原子钟的核心，分析了温度变化对谐振腔物理特性的影响，为使被动型氢钟频率稳定度达到10-15/d量级的要求，微波谐振腔部分的温度变化不能超过0.02℃/d。本文设计了一种低噪声的精密温度控制系统，并对被动型氢原子钟进行温度控制。实验结果显示，当外界环境温度变化不超过1℃时，44 h内谐振腔腔中温度波动小于0.005℃，性能优异。该方案为被动型氢原子钟数字电路的后续改进提供了依据，可应用于小型化星载氢钟设计。
Abstract：As a quantum time measuring instrument, the temperature change of atomic clock has a great impact on its long-term performance. Microwave cavity is the core of the passive hydrogen maser. This paper analyzes the influence of temperature change on the physical characteristics of the cavity. In order to make the frequency stability reach the level of 10-15/d, the temperature change of the microwave cavity should be no more than 0.02 ℃/d. In this paper, a low-noise precision temperature control system is designed to control the temperature of the passive hydrogen maser. The experimental results show that when the external temperature does not change more than 1 ℃, the temperature fluctuation of the cavity is less than 0.005 ℃within 44 hours, and the performance is excellent. This scheme provides a basis for the subsequent optimization of digital circuit of the passive hydrogen maser and can be applied to the design of a miniaturized space hydrogen maser.
[1]潘志兵,谢勇辉,帅涛,等.小型化星载被动型氢原子钟研制[J].仪器仪表学报, 2020, 41(3):105-112.
[2]帅涛,林宝军,张军,等.北斗导航卫星氢原子钟性能分析评估[J].中国科学(物理学力学天文学),2021, 51(1):125-134.
[3]陈煜舒,帅涛,陈鹏飞.被动型氢原子钟原子跃迁谱线测试与分析[J].导航定位与授时, 2021, 8(4):38-44.
[4]赵春勃,张荣彦,张强,等.被动型微波原子钟钟跃迁谱线测量技术研究[J].时间频率学报, 2022, 45(1):34-43.
[5]李锡瑞,蔡勇.氢原子钟频率合成器设计[J].时间频率学报, 2022, 45(1):44-51.
[6]翟造成,杨佩红.影响氢原子钟长期稳定度的系统效应分析[J].宇航计测技术, 2008(3):9-14+30.
[7]王义遒,王庆吉,傅济时,等.量子频标原理[M].北京:科学出版社, 1986.
[8]翟造成.氢脉泽谐振腔频率-温度效应分析[J].宇航计测技术, 2006(5):7-11.
[9]赵广东,陈鹏飞,刘杰,等.一种基于星载氢钟误差信号提取的实现方法[J].计量学报, 2021, 42(2):239-244.
[10]刘海峰,尹学玉,赵红.陕西天文台守时用氢原子钟[J].时间频率学报, 1994(S1):31-34.
[11] RUSIA P, BHONGADE S. Design and implementation of digital PID controller using FPGA for precision temperature control[C]//2014 6th IEEE Power India International Conference(PIICON), IEEE, 2014:1-4.
[12] GANI M M, ISLAM M S, ULLAH M A. Optimal PID tuning for controlling the temperature of electric furnace by genetic algorithm[J]. SN Applied Sciences, 2019(1):1-8.
[13] YUN X, DENG Z H, WANG X W, et al. Design of incremental PID controller based on FPGA[J]. Applied Mechanics and Materials, 2014, 602:830-833.
[14]邓宏彬. MSC121X系统级单片机原理与应用[M].北京:机械工业出版社, 2004.
基本信息:
DOI：10.13875/j.issn.1674-0637.2024-02-0090-07
中图分类号:TH714.14;TN791
引用信息:
[1]胡旺旺,王瑞,帅涛,等.基于FPGA的星载被动型氢钟数字温控技术研究[J].时间频率学报,2024,47(02):90-96.DOI:10.13875/j.issn.1674-0637.2024-02-0090-07.
基金信息:
中国科学院青年创新促进会资助项目（2020264）